Shenzhen Southern Machinery - SMT / THT equipment, PCB separators and spare parts since 2011
Southern Machinery Southern MachinerySMT / THT equipment and spare parts
Smart EMS warehouse - X-ray reel counting

Smart EMS X3100 X-ray Counter with Inspection
made by Southern Machinery

Put up to four reels on the tray, press both start buttons and the X3100 counts every part through the closed tape in one X-ray shot, reads every barcode, sends the quantity to your MES and prints the new label. One click switches it to X-ray inspection.

X3100 offline X-ray counter, front view with tray and keyboardX-ray image of a reel counted at 1,522 partsX3100 Inline: feeding, X-ray counting, labelling and unloading modules with reel cart
6 - 10 s
Per four reels, chip 0201 (offline X3100)
01005
Smallest part size it can count
4 - 17 in
Reel diameter, up to 430 mm and 92 mm high
< 1 µSv/h
Radiation safety test value at the cabinet
Shenzhen manufacturer since 2011Offline and inline versionsMES / ERP / WMS data outputLabel printer built inRemote set-up and training in English
In one paragraph

What the X3100 is, what it counts and what it changes

The Smart EMS X3100 from Southern Machinery is an X-ray component counter for SMT warehouses and kitting areas. A closed X-ray tube (80 kV, limited to 50 kV, 0.01 - 0.089 mA, 30 µm spatial resolution) and a 427 x 427 mm, 3072 x 3072 pixel flat panel image up to four reels at once; software counts the parts through the tape in 6 - 10 seconds per four reels (chip 0201), down to 01005 size. A 20-megapixel camera reads every barcode on the reel labels, the result goes to MES, ERP or WMS and a new quantity label is printed. Reels of 4 to 17 inch, trays, tubes, bags and loose parts can be counted, and an X-ray inspection mode shows hidden faults such as broken wires. The X3100 Inline version loads, counts, labels and unloads reels automatically.

Quick facts

Product
X-ray SMD component counter with X-ray inspection mode
Maker
Shenzhen Southern Machinery Sales and Service Co., Ltd.
Versions
X3100 offline (4 reels per shot) and X3100 Inline (automatic)
Speed
6 - 10 s per 4 reels offline; 9 - 15 s per reel inline (chip 0201)
Smallest part
01005
Packages
Reels 4 - 17 inch, trays, tubes, bags and loose parts
Data
Reads all reel barcodes; output to MES / ERP / WMS; TXT, CSV, XLS records
Price and lead time
Quoted per order - not published
The problem

The stock count is wrong long before the line stops

A reel that says 5,000 on its label and holds 1,200 is invisible until a feeder runs empty in the middle of a job. Counting by hand or by tape-wheel counter is slow, opens the reel and is only done when someone has time.

01

Lines that stop for parts the system says you have

Partly used reels come back from the line with the original quantity on the label. MES plans the next job on a number that is no longer true, and the shortage appears at the machine.

02

Counting that costs labour and opens moisture-sensitive packs

A wheel counter needs the tape pulled through it, one reel at a time. Trays and tubes are counted by eye. Every opening adds handling, ESD and moisture exposure.

03

Audits and customer consignment that never reconcile

Customer-supplied parts, cycle counts and year-end inventory need a quantity per reel ID. Without a fast count, the warehouse writes estimates and the gap shows up as scrap or emergency buys.

Count every reel when it comes back, not when a feeder runs empty.

How it works

Four steps from reel to correct label

Each step follows the X3100 brochures and operation manual. The diagram underneath is a concept view of the daily cycle, not a drawing of the software.

Verified source
LOAD 4 REELS

Load up to four reels

The tray slides out; place one to four reels (or trays, tubes, bags) in the marked positions and press both start buttons. Single-reel and multi-reel modes are selectable.

X-RAY SHOT

X-ray image in one shot

The tray goes in, the closed X-ray tube switches on and the 3072 x 3072 pixel flat panel takes one image of all reels through tape and cover.

COUNT + READ

Count and read the labels

Software counts the parts on every reel and the 20-megapixel camera reads all barcodes on the labels, matching quantity to reel ID automatically.

MES + LABEL

Send to MES and print

The result is saved to the database (daily files, TXT / CSV / XLS), sent to MES, ERP or WMS and printed as a new label for each reel.

Daily counting cycle - concept viewConcept view

Reels come back from the line or arrive at goods-in
→
Load up to 4 reels, press both start buttons
→
X-ray image, count, barcode read
→
Count plausible and every label read?No → Check part type, brightness setting or barcode type, then recount
→
Yes · Send to MES, print label, store reel
Choose a version

Two machines, one counting method

Both versions use the same X-ray tube and flat panel. Choose by how many reels you count per shift and how much handling you want to remove.

X3100 offline X-ray counter
Offline

X3100 offline X-ray counter

Stand-alone cabinet for goods-in, the kitting room or the line-side store. The operator loads the tray and applies the printed label.

  • Up to 4 reels per shot, 6 - 10 s (chip 0201)
  • Reels 4 - 17 inch, 1 - 92 mm high, up to 10 kg
  • X-ray inspection mode for hidden faults
Evidence: X3100 brochure and operation manual
X3100 Inline automatic counting system
Inline

X3100 Inline automatic counting system

Feeding, X-ray counting, labelling and unloading in one line, built for a smart warehouse or reel storage tower.

  • Automatic loading, counting, labelling and unloading
  • 9 - 15 s per reel, reels 7 - 17 inch, 1 - 80 mm
  • Label placed on a blank area with 360° visual positioning
Evidence: X3100 Inline brochure and video
What we need from you
Before you order

What we need from you

Five facts let us propose the right version and software link on the first reply.

  • Reels counted per day and the mix of reel sizes
  • Smallest part size and the packages you count
  • Your MES / ERP / WMS and label format
Plus mains voltage and the floor space you have
Specification

Specification with sources

Values for the offline X3100 unless the row says Inline. Every row names the document it was read from and carries an evidence label; values that differ between versions are listed under Versions.

ParameterValueSourceEvidence
X-ray tubeClosed type, 80 kV (limited to 50 kV), 0.01 - 0.089 mAX3100 brochure; operation manual 6Verified source
Spatial resolution30 µmX3100 brochureVerified source
Flat panel detectorDigital flat panel, 3072 x 3072 px, 427 x 427 mmX3100 brochure; operation manual 6Verified source
Imaging accuracy139 µmX3100 brochureVerified source
Counting speed6 - 10 s per 4 reels (chip 0201)X3100 brochure and manual; one brochure table states 6 - 8 sTo be confirmed
Cycle time≤ 10 s per countX3100 brochureVerified source
Counting accuracy99.99 % (0201 example)X3100 brochure - verify on your own reelsTo be confirmed
Smallest part01005X3100 brochureVerified source
Barcode camera20 megapixel, reads every label on the reelX3100 brochure; manual 7Verified source
Barcode misread rate≤ 0.01 % (0201 example)X3100 brochureTo be confirmed
Reel diameterUp to 430 mm (4 - 17 inch)X3100 brochure; manual 6Verified source
Reel height1 - 92 mmX3100 brochure; manual 6Verified source
Max. load weight≤ 10 kgX3100 brochureVerified source
ModesSingle reel or up to 4 reels at once; auto barcode scan; MES / ERP linkOperation manual 9.4Verified source
RecordsSaved per day, no capacity limit, TXT, CSV, XLSX3100 brochureVerified source
Operating systemWindows 11X3100 brochure; manual 6Verified source
PowerAC 110 - 220 V, 50 - 60 Hz, 1200 WX3100 brochure; manual 6Verified source
Radiation test< 1 µSv/hX3100 brochure; manual 6Verified source
Safety circuitsDoor interlocks 1 and 2, double safety circuit, over-voltage / over-current protection, emergency stop, anti-pinch sensorOperation manual 3 and safety notesVerified source
Machine size734 x 1456 x 1934 mm; 949 x 1456 x 1934 mm with printerX3100 brochureVerified source
Machine weight450 kgX3100 brochure; manual 6Verified source
Inline speed9 - 15 s per reel (chip 0201), ≤ 15 s per countX3100 Inline brochureVerified source
Inline size and weight3087 x 1194 x 1957 mm (4366 x 1488 x 1957 mm with cart), 1500 kgX3100 Inline brochureVerified source
X-ray inspection modeLive X-ray view of assemblies, one-click switch back to countingSouthern Machinery X3100 videoConcept view
Versions

X3100 offline or X3100 Inline

The two versions share the X-ray tube, flat panel and counting software. These are the points where they differ; your daily reel volume and floor space decide which one fits.

Status: version chosen per order from your volume and layout
PointX3100 offlineX3100 InlineHow to chooseStatus
HandlingOperator loads up to 4 reels, two-hand startAutomatic loading, counting, labelling, unloadingCount reels per shift and the labour you want to free.By version
Counting time6 - 10 s per 4 reels (chip 0201)9 - 15 s per reel, without an operatorCompare with your peak return volume after each shift.By version
Reel diameter4 - 17 inch, up to 430 mm7 - 17 inch, up to 430 mmSmall 4-inch reels go to the offline version.By version
Reel height1 - 92 mm1 - 80 mmMeasure your thickest reels and trays.By version
LabellingLabel printed, applied by the operatorLabel applied to a blank area, 360° visual positioningSend your label layout and where it must sit.By version
Footprint734 x 1456 x 1934 mm; 949 mm long with printer3087 x 1194 x 1957 mm; 4366 x 1488 mm with cartSend a floor plan with doors and aisles.By version
Weight450 kg1500 kgCheck floor load and the route into the building.By version
PackagesReels, trays, tubes, bags, loose partsReels, automatic flowTrays and loose parts are counted on the offline version.By version
Learn it in 30 minutes

A 30-minute study route for the warehouse lead who owns the counter

Adapted from Southern Machinery's learn-SMT-in-3-hours training method: one question per block, a completion check at the end of each, and every value tied to the X3100 manual. It does not replace the manual or the installer's training.

0 - 5 min: How X-ray counting works

The tube sends X-rays through the reel; metal leads and terminations absorb more than tape and plastic, so each part shows as a dark mark on the flat panel image. Software counts the marks; the camera reads the labels.

Check: explain why the reel never has to be opened.

5 - 10 min: Safety first

The X3100 is an X-ray device. Only trained staff operate it, the door is never opened while X-ray is on, interlocks and warning labels stay in place, and the beryllium tube window is never touched.

Check: name the two conditions that stop X-ray at once.

10 - 18 min: Start-up and a first count

Main power, PC power, release the emergency stop, start the counting software and log in as operator. Choose print, auto barcode scan and single or multi-reel mode, press start, load the reels and press both start buttons.

Check: run one four-reel count and apply the labels.

18 - 26 min: Reading the result

Compare the count with the label quantity and the reel history. A count that looks wrong usually means a brightness setting, an unusual package or a barcode type not set; the manufacturer account handles settings.

Check: list three reasons a count or barcode read can fail.

26 - 30 min: Shut-down and care

Close the software (the tray returns), shut down the PC, press the emergency stop and switch off the main power. Keep the cabinet clean and dry and check the safety lock every day.

Check: shut the machine down in the right order.

Fault-to-check sequence

Start with a safe state and stop at the first point you are not authorised for.

  1. Observed symptom: note the reel ID, part type, mode and what the screen shows.
  2. Safe state: stop X-ray, let the tray return and keep the door closed until X-ray is off.
  3. Software first: flat panel or X-ray init failure usually means the last session did not close - restart the software.
  4. Settings second: wrong counts - adjust brightness; no barcode read - set auto scan and the right code type; printer - check 60 x 40 mm labels, ribbon and template.
  5. Confirmed and authorised: recount and record. Not confirmed: tag the machine and contact Southern Machinery service.

Maintenance card - X3100

Verified source
  • Keep the inside and outside of the cabinet free of dust, water and oil.
  • Check every day that the safety lock and interlocks work.
  • Check that power and ground connections are tight; the cabinet must be earthed.
  • Check that every axis moves smoothly and the limit switches work; clean and re-oil the guide rails once a month.
  • Keep 5 cm free at the fan exhausts and never drill the cabinet.
Payback

Work out the value of X-ray counting from your own numbers

Every figure comes from you. The page does not assume a saving. Enter how many reels you count, how many are counted by hand today and how long that takes.

Reel counting value estimate

All inputs are yours. Nothing is sent anywhere.

Leave blank until you have a quotation.
Counting hours saved per month—
Labour cost saved per month—
Machine handling cost per month—
Net value per month—
Payback
—
A planning aid only. Results depend entirely on your inputs and do not represent a performance claim by Southern Machinery.
Videos

Watch the X3100 count and inspect

X3100 clips from Southern Machinery plus two related X-ray counters from our YouTube board. Click a card to play it here.

X3100 X-ray counter in one minute
0:17

X3100 X-ray counter in one minute

Loading reels and counting four at once.

X3100 X-ray counter with inspection
1:18

X3100 X-ray counter with inspection

Inspection mode finds broken wires, then one click returns to counting.

X3100 counting, label printing and MES link
1:32

X3100 counting, label printing and MES link

From reel to printed quantity label and MES record.

X3100 Inline automatic counting system
0:48

X3100 Inline automatic counting system

Robot loading, X-ray counting, labelling and NG outlet.

ADL100 automatic X-ray component counter
6:31

ADL100 automatic X-ray component counter

A related Southern Machinery X-ray counter.

AX6000 SMD X-ray chip counter
1:34

AX6000 SMD X-ray chip counter

A related Southern Machinery X-ray counter.

Open the full video board

Catalogues

Southern Machinery counting documents

Matched from the Southern Machinery product catalogue board: related X-ray counters, the X-ray inspection machine and our counting machines. The X3100 brochure and manual are sent on request.

PDF

SMD X-ray chip counter AX6000

Related X-ray counter brochure.

Open
PDF

ADL100 X-ray SMD counter

Related automatic X-ray counter brochure.

Open
PDF

SM-X3000A X-ray inspection machine

Dedicated X-ray inspection for BGA, voids and solder joints.

Open
PDF

S-CC200 automatic SMT component counter

Wheel-type counter for single reels.

Open
PDF

S-902 automatic SMD counter

Compact automatic counter brochure.

Open
PDF

SMZ-901 SMD components counter

Entry-level reel counter brochure.

Open

Open the full catalogue board

Insights

Eight notes on true stock and fast reel counting

Long-form notes for warehouse leads, material planners and SMT managers who want the number on the reel to be true.

ARTICLE 01The Feeder Ran Empty, but the System Said 3,000 Parts

A shortage at the machine almost always starts at the return shelf.

Full articles are in English. The summary above carries the argument in your language.

At 2:40 in the morning the feeder on slot 23 ran empty. The screen still said 3,000 capacitors were in stock, the job had 400 boards to go, and the operator was walking to the warehouse with a reel ID and a bad feeling.

The line did not stop because the part was missing. It stopped because a number was wrong. The reel had come back from the previous job with its original label, nobody recounted it, and MES planned the night shift on stock that existed only on paper. Blaming the buyer or the feeder misses the point: the error was written into the system the moment the reel went back on the shelf uncounted.

The reusable rule is simple: a reel that leaves the line is not stock until it has been counted and relabelled. Treat the return shelf as a quarantine area. Count, write the new quantity against the reel ID, print a fresh label, and only then release it to the store. It works with any counting method; what changes is how long it takes.

The Southern Machinery X3100 makes the rule cheap enough to keep. Up to four reels go on the tray, both start buttons are pressed, and one X-ray shot counts every part through the closed tape - 6 to 10 seconds for four reels of 0201 chips according to the brochure. The 20-megapixel camera reads every barcode on the labels, the quantity goes to MES and a new label is printed for each reel.

Make it a habit: at every shift change, empty the return shelf through the counter and compare the counted totals with what MES expected. The difference, reel by reel, tells you where stock leaks - scrap at the feeder, wrong splices, untracked attrition - and the list gets shorter every week.

If shortages at the machine sound familiar, send us your daily number of returned reels, your reel sizes, the smallest part you count and the MES you use. Write to info@smthelp.com or WhatsApp +86 13602562576, and we propose the X3100 version that empties your return shelf in one shift.

ARTICLE 02Count Every Returned Reel: A Rule That Pays for the Warehouse

Recount on return, not at audit, and planning stops guessing.

Full articles are in English. The summary above carries the argument in your language.

The cycle count was due on Friday. Two people spent Thursday afternoon pulling tape through a wheel counter, one reel at a time, and still finished only half the racks before the auditor arrived.

Counting only at audit time means the error has had months to grow. Partly used reels, attrition at the feeders and reels moved between jobs all drift away from the system. The audit then finds a gap nobody can explain, and the business pays for it twice: in labour for the count and in emergency purchases for the parts that were never there.

Move counting from the calendar to the event. Every reel is counted when it returns from the line and when a customer delivers consigned parts. If each count takes seconds instead of minutes, the warehouse can afford to do it every time, and the audit becomes a check rather than a rescue.

The X3100 counts four reels per shot without opening them, so a returned reel takes a few seconds of operator time: load, start, apply the printed label. Records are saved per day in TXT, CSV or XLS files with no capacity limit, which gives the auditor a reel-by-reel history instead of a single number.

Every week, pull the daily count files and list the ten reels with the largest gap between label and count. Review them with the line leader. It is the shortest meeting you will hold, and the one that fixes the most stock errors.

Tell us how many reels come back from your lines per day and how you count them today. Send it to info@smthelp.com or WhatsApp +86 13602562576 and we show you how the X3100 fits your return flow.

ARTICLE 03Why X-ray Counting Beats the Tape Wheel for Moisture-Sensitive Parts

The reel stays closed, so the bag, the dry pack and the clock stay intact.

Full articles are in English. The summary above carries the argument in your language.

A tray of moisture-sensitive ICs came out of its dry pack for a count, waited on the bench during lunch, and went back into storage with half its floor life gone. Nobody wrote it down.

Counting by hand or by tape wheel means opening the package. For moisture-sensitive devices the clock starts the moment the bag is opened; for every part, handling adds ESD risk and the chance of dropped or bent components. The count itself becomes a source of defects that show up much later at reflow.

Keep a simple rule: count without opening whenever you can, and record every time a moisture-sensitive pack is opened. A count that leaves the packaging intact protects the parts and makes the floor-life log honest.

X-ray counting does exactly that. The X3100's tube images the parts through tape, cover and reel, and the software counts them on the flat panel image. Trays, tubes and bags are counted the same way on the offline X3100, and the reel label is read by the camera, so nothing needs to be unwrapped for the quantity.

Add one column to your MSD log: counted closed, yes or no. Review the 'no' entries monthly. Each one is a reason the dry storage time is shorter than the system believes.

If you manage moisture-sensitive stock, send us the packages you count - reels, trays, tubes, bags - and the smallest part. Email info@smthelp.com or WhatsApp +86 13602562576 and we confirm how the X3100 handles them.

ARTICLE 04The Reel ID Is Half the Count: Barcodes, MES and the New Label

A quantity without a reel ID is just a number on a screen.

Full articles are in English. The summary above carries the argument in your language.

The count on the screen said 1,522. Nobody was sure which reel it belonged to, because the operator had swapped two reels on the tray before the label printed.

A quantity without a reel ID is only a number. If the count is typed in by hand or matched to the wrong reel, MES now holds a precise figure for the wrong part. That error is worse than no count at all, because everyone trusts it.

The rule: the count, the reel ID and the new label must come from one event, without typing. Read the barcode, count, print, stick - in that order and on the same reel - and never let a person carry the number from one screen to another.

The X3100 reads every barcode on the reel labels with its 20-megapixel camera while it counts, matches quantity to reel automatically, numbers the positions on the tray and sends the result to MES, ERP or WMS. In single-reel mode the label prints at once; in multi-reel mode the manual asks the operator to take the reels out one by one so each label lands on its own reel. The Inline version applies the label itself, placed on a blank area with 360° visual positioning.

Once a week, scan ten random reels on the shelf and compare the label with MES. If all ten match, your counting event is clean. If not, the mismatch shows which step - read, count or label - needs attention.

Send us a photo of your current reel label and the name of your MES or WMS. Write to info@smthelp.com or WhatsApp +86 13602562576, and we agree the data fields and label layout before the machine ships.

ARTICLE 0501005 and Beyond: What Decides Whether a Part Can Be Counted

Part size, package and the image setting matter more than speed.

Full articles are in English. The summary above carries the argument in your language.

The new product used 01005 resistors, and the warehouse lead asked the question nobody had asked before: can our counter even see them?

Speed figures sell counters, but the first question is whether a part can be counted reliably at all. Very small chips, mixed packages on one tray, reels with metal parts close together and unusual tape materials all change the X-ray image. A fast count of the wrong number is no help.

Before buying any counter, list the five hardest parts you stock - the smallest, the densest, the oddest package - and insist on a trial with those reels. Ask what the machine does when a count is uncertain, and how image settings are adjusted.

The X3100 brochure states counting down to 01005 and gives 99.99 % accuracy with 0201 as the example. The system uses a 30 µm spatial-resolution tube and a 3072 x 3072 pixel flat panel with 139 µm imaging accuracy. Brightness, grey level and contrast of the flat panel image are set during installation, and algorithm updates are installed by service when new part types need them.

Keep a 'hard parts' list next to the counter. When a new part number arrives, run it once, compare with the label, and add it to the list with a note. In six months you know exactly which reels need a second look.

Send us your five hardest part numbers and, if possible, a reel of each for a trial count. Contact info@smthelp.com or WhatsApp +86 13602562576.

ARTICLE 06Offline or Inline: Sizing an X-ray Counter to Your Reel Flow

Daily returns, reel mix and floor space decide the version.

Full articles are in English. The summary above carries the argument in your language.

The warehouse had bought one counter for three SMT lines. By the end of the night shift there were sixty reels waiting in front of it, and the operator was counting while the next shift's kits were late.

An undersized counter turns a good rule into a queue, and queues get skipped. An oversized one wastes floor space and money. The right size comes from the reel flow, not from the brochure's best speed.

Size the counter from three numbers: reels returned per shift at peak, the share of small 7-inch versus large 13 to 17-inch reels, and the minutes an operator can spend at the counter. Divide, add a margin for goods-in counts, and the version chooses itself.

The offline X3100 counts up to four reels per shot in 6 - 10 seconds (0201) with an operator loading the tray, and handles 4 to 17-inch reels, trays, tubes and loose parts. The X3100 Inline loads, counts, labels and unloads reels automatically at 9 - 15 seconds per reel, for 7 to 17-inch reels, and suits a smart warehouse or reel storage tower. The offline cabinet needs 734 x 1456 mm of floor (949 mm long with the printer); the Inline line needs about 3.1 m, or 4.4 m with the reel cart.

Track the queue in front of the counter at the end of each shift for a month. If it never empties, it is time for a second cabinet or the Inline version; if the counter stands idle, use the spare time for goods-in counts.

Send us your reel returns per shift, your reel size mix and a floor plan. Email info@smthelp.com or WhatsApp +86 13602562576 and we size the X3100 for your flow.

ARTICLE 07One Cabinet, Two Jobs: Using X-ray Inspection Between Counts

The same tube and panel can show a broken wire or a hidden fault.

Full articles are in English. The summary above carries the argument in your language.

A customer returned a batch of speakers with intermittent sound. The quality engineer needed to see inside the solder joints, and the only X-ray in the building was the reel counter in the warehouse.

Dedicated X-ray inspection systems are often booked solid or missing in smaller plants. Meanwhile a hidden fault - a broken wire, a cracked joint, a missing part inside a sealed assembly - can sit in a failure analysis queue for days.

Use the tools you already have before you open an assembly. A non-destructive look comes first, the cut-open sample second. Write down what the X-ray shows before anyone touches the part.

The X3100 has an X-ray inspection mode in which the same tube and flat panel show a live image of an assembly. In our video it finds two broken wires in a cable and shows the solder wires of a speaker, then one click switches the software back to counting. For BGA void and solder joint analysis we offer the dedicated SM-X3000A X-ray inspection machine.

Book a fixed half hour a week for inspection on the counter, outside peak return times. A short, regular slot keeps counting first and still gives quality engineers a fast first look.

Tell us what you would like to inspect - cables, connectors, small assemblies - and send a sample photo. Contact info@smthelp.com or WhatsApp +86 13602562576.

ARTICLE 08What to Send Before You Order an X-ray Counter

Five facts get you a proposal with the right version and software link.

Full articles are in English. The summary above carries the argument in your language.

The quotation came back with three questions the buyer could not answer: which reel sizes, which MES, and how many reels per day. It took two weeks to collect the answers.

An X-ray counter is a machine, a piece of software and a data link. If the supplier has to guess the volume, the parts or the system it reports to, you get a generic offer and a long installation.

Collect five facts before you ask for a price: reels per day at peak and their size mix; the smallest and the hardest parts you count; the packages besides reels - trays, tubes, bags, loose parts; the MES, ERP or WMS and your label layout; and mains voltage plus the floor space and route into the building.

With those facts we propose the X3100 offline or Inline version, agree the data fields and label template, and plan installation, flat panel and barcode set-up and operator training - including the X-ray safety rules from the manual.

Keep the five facts in one page and update it each year. It is the same page you will need for audits, for the next line expansion and for every equipment supplier.

Send the five facts to info@smthelp.com or WhatsApp +86 13602562576. We reply with the right X3100 version and the questions our engineers still need answered - before any price is discussed.

After the counter lands

What Southern Machinery does after delivery

🛠️

Installation and set-up

Set-up by our engineers or remote guidance, including barcode type, label template and flat panel settings.

🧑‍🏫

Operator training

The 30-minute route on this page plus the X-ray safety rules, delivered with the manual.

🔗

MES / ERP / WMS link

We agree the data fields and file format with your IT team before shipment.

🏭

Whole-line support

Reel storage, feeders, splicing, board handling and full SMT / THT lines.

FAQ

Questions buyers ask before they order

How fast does the X3100 count?
The offline X3100 counts four reels in 6 - 10 seconds for chip 0201 parts, with a cycle of no more than 10 seconds per count; one brochure table states 6 - 8 seconds. The X3100 Inline needs 9 - 15 seconds per reel but loads and unloads by itself. Larger or mixed parts can take longer.
How small a part can it count, and how accurate is it?
The brochure states parts down to 01005 and an accuracy of 99.99 % with 0201 parts as the example. Accuracy depends on part type and image settings, so we recommend a trial with your own reels before you order.
Which packages can it count?
Reels from 4 to 17 inch (up to 430 mm diameter, 1 - 92 mm high, up to 10 kg), JEDEC trays, tubes, bags and loose parts on the offline X3100. The Inline version handles 7 - 17 inch reels up to 80 mm high.
Does it connect to our MES, ERP or WMS?
Yes. It reads every barcode on the reel labels, keeps its own database with daily TXT, CSV or XLS records and has an MES / ERP link. The data fields and interface are agreed with your IT team for each order.
Is it safe to have an X-ray machine in the warehouse?
The radiation test value is below 1 µSv/h. The cabinet has two door interlocks, a double safety circuit, over-voltage and over-current protection and an emergency stop. Only trained staff should operate it, and local registration rules for X-ray equipment apply in your country.
What does the inspection function do?
The same X-ray tube and flat panel can show a live image of an assembly, for example broken wires in a cable or solder wires in a speaker, as in our video. One click switches the software back to counting. For BGA void analysis we offer the dedicated SM-X3000A inspection machine.
What does it cost and how long is delivery?
Price, lead time, warranty and payment terms are quoted for your version and options and are not published on this page. Send your daily reel volume, reel sizes, smallest part and MES system for a quotation.
What power and space does it need?
AC 110 - 220 V, 50 - 60 Hz, 1200 W. The offline X3100 measures 734 x 1456 x 1934 mm (949 mm long with printer) and weighs 450 kg; the Inline version measures 3087 x 1194 x 1957 mm and weighs 1500 kg.
Contact

Send your reel volume and parts, not just the enquiry

The fastest answer starts with your daily reel volume, the reel sizes, the smallest part you count and the MES or WMS you use. A photo of your current label helps us set up the printout.

X3100 X-ray counter enquiry

This form opens your own mail client. Nothing is sent from the page.