SOUTHERN MACHINERY · SMT / THT AUTOMATION

SRT7001 Terminal Reel Feeder for Smart EMS PCB Assembly

Turn reel-fed terminals into a controlled supply for your assembly process.

Automated terminal cutting and feeding for SMT, THT and robotic integration projects. Start with your actual terminal, then engineer the handoff to your machine.

SRT7001REEL TERMINAL CUTTING + FEEDING
SRT7001 terminal reel feeder product illustration from the Southern Machinery datasheet

SRT7001 product view · supplied model datasheet, page 2

Source-verified product views. Final supplied configuration is subject to engineering review.

0.8 sDocumented supply time / terminal
±0.5 mmDocumented feeding precision
24 VDocumented operating voltage

Datasheet values, not a guarantee of complete PCB assembly throughput or insertion accuracy.

MAKE THE HANDOFF WORK

A small terminal can define a much larger process.

If reel handling, cutting and pickup are disconnected, the assembly machine may wait for its next part. Evaluate the complete material handoff before investing in more machine speed.

01 /

Supply from the reel

Motor-driven feeding advances reel terminals; a pneumatic cutter separates the material. Both functions are documented for SRT7001.

02 /

Plan the machine interface

PLC-based control supports I/O communication or independent control. Mounting, signal mapping, pickup tooling and host-machine approval remain project-specific.

03 /

Qualify with your parts

Use representative terminal reels and your required output to define a trial. Confirm cut quality, orientation, pickup and downstream assembly together.

FROM MATERIAL TO ASSEMBLY

One material path. Four decisions to get right.

Conceptual process map · downstream configuration to be confirmed

01

Reel input

Verify terminal drawing and packaging.

02

Advance + cut

SRT7001 motor feed and pneumatic cutting.

03

Pickup handoff

Confirm position, tooling and signals.

04

PCB assembly

Validate placement or insertion on the host system.

DOCUMENTED MODEL DATA

Know the starting point. Validate the application.

The model datasheet (page 2) and Customized Feeder Nozzle Catalog V03 (page 11) agree on these values. Confirm the final configuration and acceptance conditions with Southern Machinery engineering.

ParameterPublished specification
ModelSRT7001
MaterialReel terminal
Documented terminal tab6.35 × 0.81 mm
Profile height from PCB10.21 mm
Overall dimensions (L × W × H)550 × 130 × 110 mm
Weight10 kg
Supply time per terminal0.8 s
Feeding precision±0.5 mm
Working voltage24 V
Working air pressure0.4–0.6 MPa
Feeding / cuttingMotor propulsion / air-cylinder-driven cutter
ControlPLC; I/O communication or independent control
OperationButtons
Material-shortage detectionAlarm after 3 consecutive no-material detections

The documented terminal size is a reference configuration, not a universal size range. Reel pitch, reel size, cutting requirements, connector pinout and compatibility with your machine must be confirmed. Price, lead time, warranty and certification applicability: to be confirmed.

SEE THE SOURCE

Product documents, close-up views and working-video resources.

Read the supplied product documents directly. Use the video library to locate a working demonstration, then request a trial using your own terminal reel.

SRT7001PDF

SRT7001 model datasheet

V03PDF

Customized Feeder Nozzle Catalog V03

Working-video library

A model-matched YouTube demonstration still needs verification. No unrelated demonstration is presented as SRT7001 evidence.

Open Southern Machinery video board

Product facts: supplied SRT7001 datasheet, p. 2; supplied Customized Feeder Nozzle Catalog V03, p. 11. Images: model datasheet, p. 2. Process explanations and buying guides are engineering considerations, not additional model specifications.

THE EMS ENGINEERING NOTEBOOK

Eight practical ways to make terminal automation pay attention to the real process.

Short buying and integration guides for engineers, production leaders and EMS decision-makers. Open any article to read the complete guide.

Guide / 01

Your placement machine is only as ready as its next terminal

Look at the handoff before buying more speed.

Read the guide

A machine can be ready while its next terminal is not. That gap is a useful place to start an automation review.

Manual separation, inconsistent presentation or a waiting pickup station can consume time outside the machine cycle. Confirm which event actually causes waiting on your line.

Follow one terminal from reel to PCB. Record advance, cut, presentation, pickup and assembly as separate events. Compare waiting and rejects with the required board output.

SRT7001 provides documented motor-driven feeding and pneumatic cutting. Its 0.8-second supply figure describes feeding; it does not establish the throughput of the integrated cell.

Repeat the observation after a reel change and with another representative material lot. A useful improvement must survive normal production variation.

Send your terminal drawing, packaging photo and host-machine model to Southern Machinery. Start with an application review before making a capacity commitment.

Discuss this application
Guide / 02

A fast feeder still needs a reliable pickup

Treat feeding precision and insertion accuracy separately.

Read the guide

A separated terminal has not yet become a correctly assembled terminal. The pickup handoff connects those two states.

A terminal can arrive on time and still be difficult to grip, orient or insert. Confusing feeder repeatability with finished assembly accuracy hides that risk.

Define the pickup surface, orientation, presentation position and downstream acceptance requirement. Validate them together with the nozzle or gripper and host machine.

The SRT7001 datasheet states ±0.5 mm feeding precision. Use that value in an engineering review; it is not a promise of PCB placement or insertion accuracy.

Keep a record of pickup outcomes across representative parts and approved setups. Review changes to material geometry or tooling before the next run.

Share a terminal drawing and a close-up of the intended pickup surface. Ask Southern Machinery to review the feeding and pickup concept together.

Discuss this application
Guide / 03

Compatibility is an engineering decision

Check the physical and control interfaces together.

Read the guide

A familiar connector does not prove that two machines can work together. Integration starts with the full interface.

Mounting clearances, pickup coordinates, signal timing and abnormal-state behavior can each prevent an otherwise suitable feeder from working in a cell.

Create one interface sheet covering mechanical fixing, electrical connection, air supply, I/O definitions and recovery behavior. Have both sides approve it.

SRT7001 documents PLC control and I/O communication or independent operation. Compatibility with a specific SMT machine or robot still requires project confirmation.

Keep the approved interface revision with the production setup. Recheck it when the host program, tooling or feeder configuration changes.

Send the exact machine model and your interface information. Request a compatibility review instead of assuming a universal connection.

Discuss this application
Guide / 04

Begin with the terminal, not the brochure

Packaging and geometry determine the qualification work.

Read the guide

Two terminal reels can look similar while creating very different feeding and cutting requirements.

Differences in carrier pitch, material condition, terminal shape or required cut location can matter more than the model name on the feeder.

Collect the drawing, reel dimensions, packaging photos, sample parts and cut-quality requirement. Define orientation and pickup conditions before agreeing on a trial.

The SRT7001 documents a 6.35 × 0.81 mm tab and a 10.21 mm profile height from PCB. These describe the published reference; they do not establish a universal material envelope.

Maintain the approved part and reel revisions. When the supplier changes packaging or geometry, review whether the existing qualification still applies.

Share your actual terminal and reel information with Southern Machinery. Confirm application fit before selecting the final configuration.

Discuss this application
Guide / 05

Make acceptance measurable before shipment

Replace a vague demonstration with agreed evidence.

Read the guide

A successful demonstration matters most when everyone agrees on what success means.

An unloaded run or a short visual demonstration may miss pickup losses, cut defects or unstable recovery. A catalog statement alone cannot settle those questions for a specific machine.

Agree on sample material, setup, run conditions, inspection method, defect rules and result recording. Link the report to the delivered configuration and machine serial number.

The SRT7001 datasheet lists 500 continuous feeds and 48 hours of operation without abnormality. Use these as discussion points for a project test, not proof that your unit has passed.

Review open issues after the trial and repeat affected checks after corrections. Preserve the approved result for installation and future changes.

Ask Southern Machinery for an application-specific acceptance plan and recorded results using your representative terminal reels.

Discuss this application
Guide / 06

Evaluate the cell, not an isolated cycle time

Build a business case from observed production data.

Read the guide

A shorter feeding cycle only matters if it improves the process that limits output.

A PCB with several terminals, a slow pickup sequence or downstream waiting may erase an apparent speed advantage. Labor savings also depend on the operator's remaining work.

Measure board output, terminal demand, downtime, rejects and operator tasks. Compare a proposed cell against that baseline using agreed trial conditions.

SRT7001 automates terminal feeding and cutting. The published 0.8-second feed time is one input to the analysis; it is not an ROI figure or a board-per-hour guarantee.

Revisit the business case after the pilot with measured results. Update assumptions for product mix, changeovers and material replenishment.

Bring your target boards per shift, terminals per board and current bottleneck. Request a feasibility review grounded in your production data.

Discuss this application
Guide / 07

A good changeover begins with a controlled setup

Make repeatability part of the production plan.

Read the guide

The first successful run is only one part of a repeatable process. The next approved setup matters just as much.

Unrecorded part revisions, changed tooling or different reel packaging can make a previously stable process difficult to reproduce.

Record the approved terminal, reel, tooling, host program and interface configuration. Define the first-article checks required after a change.

SRT7001 uses button operation and PLC-based control. Detailed settings, adjustment permissions and maintenance intervals must follow the current manual and your approved procedure.

Review stoppages and first-article results after each relevant change. If an abnormal condition appears, put the machine in the prescribed safe state and escalate to qualified personnel.

Ask Southern Machinery to include setup documentation, training scope and recommended spare-parts information in your project review.

Discuss this application
Guide / 08

Build your smart EMS project one verified handoff at a time

Start with a pilot that answers the next real question.

Read the guide

A smart factory is built from dependable material and information handoffs. A feeder is one part of that system.

Buying isolated automation can shift a bottleneck into pickup, insertion, soldering or inspection. It can also leave interfaces and ownership unclear.

Map the terminal route through feeding, assembly and the required downstream process. Assign acceptance criteria and responsibility to every handoff before expanding the cell.

Position SRT7001 as the terminal cutting and feeding element. Confirm the host machine, inspection, soldering and any traceability integration separately; they are not implied feeder features.

Use a pilot to collect evidence, close open issues and decide what to scale next. Repeat the review when the product or production target changes.

Send Southern Machinery your application, terminal sample information and existing line outline. Define the smallest useful pilot together.

Discuss this application

BEFORE YOU SPECIFY

Clear answers for your next engineering discussion.

What does the SRT7001 do?

It automates cutting and feeding of reel terminals for SMT, THT and automated-line integration projects. Final host-machine compatibility and pickup tooling require confirmation.

Does 0.8 seconds mean a guaranteed production output?

No. It is the supply time per material item stated in the datasheet. Complete-cell output also depends on pickup, assembly, terminal count, downtime and the downstream process.

Can it handle every terminal reel?

The published reference lists a 6.35 × 0.81 mm tab and a 10.21 mm profile height from PCB. Other geometry, reel pitch, packaging and cutting requirements need engineering review.

What should I send for an application review?

Start with a terminal drawing or sample photo, reel packaging details, the host-machine model and your target output. Southern Machinery can then identify the next information needed.

START WITH YOUR REAL PART

Let’s engineer the next terminal handoff.

Send a terminal drawing or sample photo, the reel packaging and your machine model. We will use these details to begin an application review.

Final model configuration, compatibility, commercial terms and acceptance criteria require sales and engineering confirmation.

If the PDF preview is unavailable, use the download button.