01Separate transport height from tower clearance
Agree the footprint, access space, magazine and utilities.
English
Transport height and overall height answer different questions. Both belong on the installation drawing.
A line may align correctly at the board edge while a signal tower, service opening or nearby fixture still lacks clearance.
Record the board-transfer datum, machine footprint and the clearance needed above and around the equipment. Check what each stated dimension includes.
This SLF250 configuration lists a 900 ± 20 mm transfer height and an L1150 × W700 × H1250 mm machine envelope. Confirm signal-tower clearance in the final layout.
Keep the agreed installation drawing with the machine, especially when relocating the line.
Send the adjacent equipment height and your installation envelope. Request a dimensioned layout for the exact SLF250 configuration.
Request a quote02Ask what actually pushes the PCB
Confirm the specification and acceptance checks in writing.
English
The board pusher connects the magazine position to the next stage of the line.
Pusher position, board-edge contact and magazine-slot alignment need to suit the component clearances and handling requirements of your PCB.
Review the board contact edge, slot alignment, component clearance and the required downstream handoff. Agree a test using representative boards.
The SLF250 uses pneumatic board pushing with PLC control. Its manual width adjustment allows the setup to be matched to the selected PCB format.
Keep the accepted setup and board reference so later product changes can be checked against the same conditions.
Send the PCB edge and component restrictions. Ask Southern Machinery to confirm the pusher arrangement and loading trial in the proposal.
Request a quote03Agree the downstream request signal
Send PCB size, thickness, board edge and component clearance.
English
The next machine should be part of the loader discussion from the beginning.
An otherwise suitable loader can wait indefinitely or transfer at the wrong time if the interface and operating conditions have not been agreed.
Identify the downstream machine, requested-board signal, ready conditions and response to a stopped line. Confirm the connection against the actual electrical documentation.
This SLF250 package specifies a SMEMA interface with a machine-side female connector and a supplied mating cable of 3 m.
Store the approved interface and test result with the line documentation. Recheck them when changing the connected machine.
Share the downstream machine model and signal requirements. Ask Southern Machinery to include the interface check in acceptance.
Request a quote04Plan access before the machine arrives
Confirm direction, transfer height and the adjacent equipment.
English
A compact layout is useful only if people can still load, adjust and service the machine.
A floor plan that shows only the outside rectangle can hide the space needed for magazines, cabinet access and maintenance.
Review magazine insertion and removal, width adjustment, the cabinet door, air supply and the operator position together.
The SLF250 combines an L-type magazine arrangement, a control cabinet and a vertical lift assembly. Plan clear access to the magazine, controls and service door.
Preserve the agreed access zones when adding nearby equipment or moving the line.
Send the available floor area and service-side restrictions. Ask for a layout review of the exact SLF250 configuration.
Request a quote05Keep repeat loader orders consistent
Agree the footprint, access space, magazine and utilities.
English
A clear machine configuration helps you maintain a consistent setup when adding capacity or ordering another loader.
PCB range, magazine dimensions, direction, electrical supply and selected options should remain consistent across your line specification and purchase requirements.
Keep the quotation, PCB range, magazine dimensions, utilities and selected options together. Confirm revisions whenever the board range or connected equipment changes.
This SLF250 configuration combines a 330 × 250 mm maximum PCB size, manual width adjustment, pneumatic pushing and PLC control. Confirm the complete package when ordering or expanding your line.
Use the accepted configuration and drawings when reordering, and reconfirm any changed board or line interface.
Send the configuration you need and identify any existing reference machine. Request a written proposal with the relevant options stated.
Request a quote06Define the loading trial before the shipment
Confirm the specification and acceptance checks in writing.
English
A loading trial helps you confirm magazine fit, board handling and the handoff to your production line before shipment.
Board support, slot alignment, handoff conditions and restart behaviour should be checked against your production requirements.
Agree the sample boards, magazine, loading sequence, interface conditions and acceptance observations before shipment.
The SLF250 application trial can use your typical and challenging boards to check the agreed magazine, loading setup and downstream connection.
Keep the trial record and reference setup so later board changes can be reviewed consistently.
Send typical and difficult boards from your range. Ask Southern Machinery to agree an application trial before completing the order.
Request a quote07Start the loader inquiry with the board
Send PCB size, thickness, board edge and component clearance.
English
A loader configured around your PCB range gives the line a clear starting point for magazine selection, pushing and downstream transfer.
PCB dimensions alone may leave thickness, edge clearance and component interference unresolved. Those details affect the magazine and pushing arrangement.
Provide the minimum and maximum PCB, thickness, board-edge restrictions and a sample or drawing. Include the downstream machine and transport direction.
This SLF250 configuration is specified for 50 × 50 to 330 × 250 mm PCBs, with manual width adjustment, PLC control and pneumatic pushing.
Keep the accepted board requirements with the machine configuration and revisit them when introducing a new board family.
Send Southern Machinery your PCB range and drawing. Request an SLF250 configuration review and an agreed loading trial.
Request a quote08Make the magazine part of the specification
Confirm direction, transfer height and the adjacent equipment.
English
A correctly matched magazine brings the PCB slots, lift support and loading position together.
Magazine dimensions, slot pitch, board support and handling clearance all affect compatibility with your PCB and loading process.
Confirm the magazine dimensions, slot arrangement and PCB position. Review how the magazine is inserted, supported and removed in the proposed layout.
This SLF250 configuration includes one 355 × 320 × 563 mm magazine. Share your existing magazine details if it needs to work with your current production setup.
Keep the accepted magazine or its controlled specification as a reference for replacements and repeat orders.
Share your existing magazine details or confirm that a new one is required. Ask Southern Machinery to check magazine and PCB compatibility together.
Request a quote
