Southern Machinery · Shenzhen, China +86 136 0256 2576 info@smthelp.com

THT soldering · High-mix low-volume

S-100B Desktop Selective Soldering Machine

A desktop selective soldering system for high-mix, low-volume THT assembly — flux, preheat and solder precisely where you need it, without fixtures.

Positioning ±0.05 mm · Titanium solder pot, 8 kg · N2 preheat · PC-based control · No fixtures required. Ideal for labs, prototyping and small lines.

±0.05 mmPositioning and repeatability on the 3-axis XYZ robot
8 kgTitanium solder pot, PID heating 0–400 °C, lead-free ready
0Fixtures needed — ultra-fast changeover for HMLV production

The hidden cost of THT soldering in high-mix production

Manual and whole-board soldering are quietly taxing your line

Every inconsistent joint, every fixture change and every flux-wasteful run costs money. Left unmanaged, THT soldering becomes the bottleneck your customers notice.

Manual soldering is inconsistent

Hand-soldering THT joints varies from operator to operator — quality depends on the shift, not the process.

Fixture cost eats your margin

Every board variant needs its own fixture or pallet; high-mix lines drown in tooling spend and changeover time.

Big wave machines are overkill

A full wave line cannot justify its footprint and energy bill for small boards and short runs.

Heat damages sensitive parts

Whole-board soldering exposes temperature-sensitive components to heat they were never designed for.

Flux and dross waste

Broad-flux processes waste flux and create solder dross that drains consumable budgets.

High-mix lines can't wait

Prototyping and small batches need fast changeover — traditional equipment was built for long runs.

Feature · Advantage · Benefit

What the S-100B actually changes on your floor

Select a feature to connect the verified capability with its technical advantage and the practical benefit your factory feels.

S-100B precision motion system Source: S-100B technical overview
Precision

Precision motion on a 3-axis robot

Every joint soldered exactly where it should be.

Feature

3-axis XYZ robot with X/Y stepper motors plus Z-axis servo and ball screw; positioning and repeatability ±0.05 mm on high-quality linear guides.

Advantage

The solder tip returns to the same position cycle after cycle.

Benefit

Consistent, repeatable joints — yield you can rely on.

±0.05 mm · XYZ robot · Linear guides
±0.05 mm

Positioning and repeatability for consistent, precise joints.

8 kg

Titanium solder capacity with PID heating to 400 °C.

8000+

Reference daily output in points per unit for HMLV runs.

0

Fixtures required — change boards in minutes, not hours.

Source-verified technical data

Key specifications for project evaluation

Values support initial evaluation and remain subject to final technical confirmation against your feeder cart and tape formats.

S-100B core specifications

From the technical overview
ApplicationDesktop selective soldering for HMLV (high-mix low-volume) THT assembly
Motion platform3-axis XYZ robot: X/Y stepper motors, Z-axis servo with ball screw
Positioning / repeatability±0.05 mm / ±0.05 mm
GuidanceHigh-quality linear guides, low noise
Control systemPC-based industrial control; scan-data and GABER dual-mode programming
Fluxing systemST-6 jet valve (imported quality); stainless steel / PP pressure tank, 1 L capacity
Solder potTitanium alloy with stainless inner tank; 8 kg solder; external heating plate, PID 0–400 °C; lead-free compatible
PreheatN2 (nitrogen) preheat; nitrogen source required
NozzlesStandard 4 mm and 5 mm; custom shapes available; alloy steel with silver plating
StructureHeavy metal base plate; net weight approx. 100 kg

Operation & maintenance

Reference practice
Soldering temperatureTypically 230–260 °C, set by process
Consumables1 L flux tank refill and nitrogen source
MaintenanceModular design for quick cleaning of impeller and tunnel; easy nozzle changes
Warranty1 year, with lifetime maintenance support

Specifications from the Southern Machinery S-100B technical overview and marketing plan. Final configuration, board size range and cycle time are confirmed after a sample board trial.

±0.05 mmTitanium pot 8 kgN2 preheatST-6 flux valvePC controlNo fixtures4/5 mm nozzlesCustom nozzles

Optional online media

Watch selective soldering in action

Videos load only after you select them, keeping this page lightweight. All clips are from the official Southern Machinery YouTube channel.

S100B HMLV selective soldering video poster

S-100B HMLV selective soldering

Ultra-fast changing without fixtures for HMLV PCBA.

Low cost desktop selective soldering video poster

Low-cost desktop selective soldering

Desktop selective soldering for Smart EMS factories.

SMThelp selective soldering machine video poster

Selective soldering by SMThelp

Selective soldering machine made by Southern Machinery.

Selective soldering solutions video poster

Selective soldering solutions

An overview of selective soldering approaches.

You are offline. The product presentation remains available; videos can be loaded when a connection is restored.

From sample trial to production

Engineering support around your soldering deployment

We prove the process on your boards before you commit — trial weld, configuration and training included.

01 · Sample board trial

Send your PCBs for a free trial weld and yield report.

02 · Technical consultation

Board size, joint count and cycle time confirmed within 24 hours.

03 · Configuration

Nozzles, N2 setup and programming modes matched to your boards.

04 · Installation & training

Machine commissioned and operators trained on programming and daily use.

05 · After-sales support

One-year warranty with lifetime maintenance and spares.

Technical evaluation FAQ

Questions buyers ask before ordering

What is the difference between selective soldering and wave soldering?

Wave soldering floods the whole bottom of the board with solder; selective soldering applies solder only to the joints you program, using a moving mini-wave or solder nozzle. That protects temperature-sensitive components and removes the need for fixtures on high-mix boards.

Which boards can the S-100B handle?

The S-100B is designed for high-mix, low-volume THT assembly — labs, prototyping, small production lines and boards that change frequently. Board size and joint program are confirmed during the sample trial.

Do I need nitrogen?

Yes — the S-100B uses N2 preheat to protect the board and reduce oxidation, and a nitrogen source is required as a consumable input.

What nozzle sizes are available?

Standard nozzles are 4 mm and 5 mm, made of alloy steel with silver plating; custom shapes are available for unusual joint geometries.

How is accuracy maintained?

The 3-axis robot uses X/Y stepper motors and a Z-axis servo with ball screw on high-quality linear guides, holding ±0.05 mm positioning and repeatability on a 100 kg stable base.

How do I get a price and delivery time?

Email info@smthelp.com or WhatsApp +86 136 0256 2576 with your board samples or drawings and volume. Quotation and delivery schedule are provided after technical confirmation — typically the same working day.

Next step

Send your sample boards for a free trial weld

Tell us your board size, THT joint count and daily volume. We trial-weld your samples, report the yield, and reply with a configuration, quotation and delivery schedule.

Product image