A servo-driven, N₂-shielded mini-wave that replaces inconsistent manual soldering and oversized wave lines — zero thermal shock to adjacent SMT parts, zero pallets, high ROI for High-Mix Low-Volume (HMLV) THT assembly.
Double-sided SMT boards with a few through-hole parts break both traditional approaches. The S-100 series was engineered for exactly this gap.
Quality follows the operator's mood and shift fatigue. Cold joints, bridges, no process data, no traceability — and skilled solderers are expensive and scarce.
Hundreds of kg of solder, 10–20 kW draw, hours of warm-up, expensive pallets for double-sided boards — uneconomic for 100–500 pc batches, and the wave can't touch boards with micro-clearance SMT.
A robotized iron still starves on high-thermal-mass pins: fast tip wear, poor heat transfer on thick copper, hidden cold joints.
Every verified machine feature, connected to its technical advantage and the practical production benefit it buys you.
Titanium alloy pot (8 kg B / 5 kg C) with PID-controlled impeller wave, 0–8 mm software-adjustable height, showered in inline-heated N₂ (>99.999%).
A mirror-bright, oxidation-free solder fountain wets only the programmed pads — safe at 3 mm from the nearest SMT component.
Zero bridging, full barrel fill for IPC Class 3 boards, shiny inspectable joints — without masking caps or pallets.
ST-6 jet spray valve with constant-pressure 1 L tank; flux path and dosage programmed per pad.
Flux lands only where soldering happens — never on the laminate, switches, connectors or nearby SMT.
No-clean boards, drastically lower flux spend, and zero post-wash labor or residue complaints on LED optics.
X/Y stepper + Z-axis servo on ball screws and precision linear guides; 100 kg vibration-damping base; 500 mm/s travel.
The mini-wave repeats the identical path, height, offset and dwell on every joint, every shift, every batch.
Manual variance eliminated — one ordinary operator produces auditor-grade consistency all day.
Windows industrial PC: scan a real PCB photo, drag-and-drop flux/solder vectors, set speed and dwell per point; recipes saved per PCB menu.
A new product is in production in ~5 minutes — no G-code, no fixtures, no pallets.
HMLV changeover stops being downtime, and full parameter traceability wins you automotive & medical audits.
Inline N₂ heating to 400 °C, optional bottom pre-heat module, and per-joint dwell-time control (0.5 s+ on demand).
High-thermal-mass leads — connectors, transformers on thick copper — reach wetting temperature while tiny joints are never overheated.
Cold joints eliminated on your hardest boards. First pass, every pass — no touch-up bench.
550×650×650 mm footprint; 3 kW max / 1 kW running; 8 kg solder charge vs hundreds of kg; only 0.1–0.5 kg dross per day under N₂.
Fits on a bench beside the line, ready in ~30 min, sips power and solder where a wave line gulps both.
Electricity, solder and labor savings repay the machine in months — industrial quality at an entry-level budget.
Values transcribed from supplied Southern Machinery documentation. Final configuration subject to engineering confirmation.
| Parameter | S-100B Desktop | S-100C High-Density |
|---|---|---|
| PCB work area | Max 300 × 300 mm (standard), 400 × 300 mm (custom) | 30 × 30 to 300 × 350 mm; thickness 0.5–6.0 mm; bottom clearance ≤ 80 mm |
| Machine dimensions / weight | L550 × W650 × H650 mm · ~100 kg | L850 × W800 × H1250 mm · 200 kg (0.68 m²) |
| Solder pot | 8 kg titanium alloy liner, external PID plate, 0–350 °C, 30–40 min melt | 5 kg titanium pot, 1.5 kW, ambient–350 °C, auto replenish + low-level alarm |
| Wave height | 0–8 mm, software controlled, PID impeller | 0–50 mm dynamic stepper-controlled wave |
| Nozzles | 4 mm / 5 mm standard, custom shapes available | Single-nozzle precision, modular quick-change |
| Flux system | ST-6 jet valve, constant-pressure PP/stainless tank, 1 L | Constant-pressure spray, 3-axis linked path |
| Motion & accuracy | X/Y stepper + Z servo, ball screws; ±0.05 mm; 500 mm/s | XYZ stepper, 6 kg payload; patented chain-wheel transport |
| Nitrogen | >99.999% purity, 3–4 Bar, 1–2 m³/h per nozzle, inline heated | 99.999% purity, 1.2 m³/h per tank, 0.4 MPa |
| Dross under N₂ | 0.1–0.5 kg / day | 0.1 kg / 8 h |
| Power | 3 kW max / 1 kW running (220 V 50 Hz) | 2 kW start / 0.7 kW running |
| Air supply | 3–5 Bar (8–12 L/min) | 0.4 MPa |
| Control & traceability | Windows PC, visual pathing, recipes saved per PCB | Dual PC + PLC, top-mounted eye-level interface, full parameter logging |
| Throughput reference | 2,000–3,000 dots/h (≈40–60 UPH @ 50 joints) | HMLV changeover in ~5 min via photo programming |
Residue and oxides block conventional nozzles and force line stops.
Modular titanium pot with quick-release nozzles and rapid impeller/tunnel cleaning; N₂ shield keeps dross at 0.1–0.5 kg/day; standard solder-bar top-up without disassembly.
Thick copper and heavy components steal heat; boards and SMT parts suffer shock.
PID closed-loop solder temp, inline-heated N₂ to 400 °C, optional bottom pre-heat module, and per-joint dwell programming deliver full penetration with zero shock.
Pallets, G-code and trial runs eat HMLV profitability.
Photo-based visual pathing programs a new board in ~5 minutes; recipes stored per PCB for perfect repeatability; no fixtures, no pallets, half-hour operator training.
Batch sizes of 50–500 with daily changeovers. No pallets, 5-minute programming, saved recipes.
N₂-shielded joints and full parameter traceability support IATF 16949-style audit demands.
Spot-only fluxing keeps optical surfaces clean; 0–50 mm wave (S-100C) clears metal-core substrates.
Extended dwell + pre-heat defeats the heat-sink effect of inverters and high-power modules.
Replaces manual iron benches on control boards with repeatable robotic quality at 1 kW.
Class 3 barrel fill, shiny oxide-free joints and batch-level data traceability by default.
Videos load only after you click, keeping this page lightweight. Visual context only — a process trial on your board remains the validation step.








Per board, a wave is faster. Per order, it isn't: pallets take days and cost money, masked boards still need touch-up, and warm-up burns hours. The S-100 needs no pallets, programs in 5 minutes and exits with zero rework — for HMLV batches your total delivery time drops.
An iron-tip robot automates the iron, not the process: tip wear, poor heat transfer on heavy pins, no flux control. The S-100 is a true mini-wave — a continuous fountain of fresh, N₂-shielded molten solder with programmed flux, preheat, dwell and wave height. It is wave-solder quality without the wave-solder footprint.
>99.999% purity at 3–4 Bar; consumption is only 1–2 m³/h per nozzle, so a small nitrogen generator or bottles are enough. The machine includes the flow regulator, solenoid valve and inline heater.
Yes. Per-joint dwell time and spray width are individually programmed: long dwell and wider spray on the heavy pin, a quick sweep and micro-dot on the small one — with a minimum 3 mm clearance to SMT parts.
The S-100 stays as your NPI / engineering cell while Southern Machinery upgrades you to inline selective soldering or a full SMT → THT → wave line with board handling. One vendor, one growth path.
Every thermal and motion parameter is saved per PCB recipe for perfect repeatability and batch traceability on the Windows industrial PC; the PC-based architecture provides the integration base for MES-level connections on request.
Send the five data points below and our engineers will return a model recommendation (S-100B or S-100C), nozzle/pre-heat configuration, N₂ supply advice and a cycle-time estimate for your board.